Operation and Maintenance Guide for Vertical Stainless Steel Multistage Pumps

Operation and Maintenance Guide for Vertical Stainless Steel Multistage Pumps

I. Operation Guide

Installation preparation. Location: install in a dry, well-ventilated place away from direct sun and rain, on a stable, level foundation to reduce vibration and noise. Pump check: inspect the pump and accessories for damage or deformation. Piping: choose pipes matching the inlet/outlet sizes, connect tightly and avoid excessive bends to reduce flow resistance.

Electrical connection. Check that the supply voltage matches the rated voltage and that cables are secure and insulated. Wire the motor according to the diagram on the terminal box and motor nameplate; connect it to a quick, effective starter to protect against phase loss, voltage fluctuation and overload.

Starting. Priming: in a flooded system, fill the pump, close the outlet valve, open the vent valve on the pump head, slowly open the inlet valve until steady water flows from the vent, then close it. Check rotation direction against the arrow on the pump head. After start, slowly open the outlet valve to avoid pressure shock.

Running monitoring. Regularly check outlet flow and pressure, and watch operating temperature and noise; stop and investigate any abnormality.

II. Maintenance Guide

Regularly inspect bearings and seals for wear and fasteners (bolts/nuts) for looseness. Clean the inside and outside of the pump and lubricate bearings periodically to extend life.

Troubleshooting: if no liquid is delivered, check motor rotation, liquid level, air in the suction pipe, voltage and mechanical seal. If flow is low, check for blockage, power and speed. If there is noise or vibration, check shaft alignment and foot nuts.

III. Safety Notes

Wear protective clothing, face shield and safety footwear when handling hazardous environments or liquids. Cut power before removing the motor terminal box cover or disassembling the pump. Mind the direction of the vent outlet to avoid injury or scalding.

Leave a message
Email sales@tonglianpump.com
WhatsApp WhatsApp: 8618868101711
Back to top

Contact Us

Leave a message