The WFB seal-less self-priming pump is a new industrial pump that combines self-priming with a zero-leak structure, widely used in chemical, pharmaceutical, environmental and food industries. It removes the shaft seal (mechanical or packing) that conventional centrifugal pumps require, fundamentally eliminating leakage caused by seal failure. This ‘seal-less’ design does not mean an open casing; rather, a unique dynamic sealing system works together with a reservoir and a gas-liquid separation chamber for efficient, reliable self-priming.
Core Structure: Four Chambers Working Together
The WFB pump consists of a suction chamber, impeller, casing, reservoir, gas-liquid separation chamber and return hole. The key is ‘built-in liquid storage + automatic circulation’:
The reservoir at the pump bottom holds a suitable amount of working liquid (usually the medium itself) before start, and retains it after shutdown for the next start.
The gas-liquid separation chamber above the outlet uses centrifugal force and gravity to separate gas from liquid; gas is vented and liquid returns.
The return hole/tube connects the separation chamber to the impeller inlet so separated liquid re-enters the circulation loop.
The dynamic seal uses the centrifugal force of the high-speed impeller to form a liquid-ring barrier around the shaft, replacing the mechanical seal and achieving dynamic ‘liquid-sealing-liquid’.
The Three Stages of Self-priming
Stage 1 – Initial evacuation: the impeller flings reservoir liquid against the casing, lowering internal pressure and drawing in air that mixes with liquid into a gas-liquid flow.
Stage 2 – Separation and circulation: the mixture enters the separation chamber; gas rises and is vented while liquid falls back, part returning through the return hole to the impeller, gradually building vacuum.
Stage 3 – Full self-priming and stable delivery: once the suction pipe is purged and liquid fills it, the pump switches to normal centrifugal delivery at rated flow and head, while the reservoir keeps enough liquid for fast re-priming (usually within 90 s, suction lift up to 5–8 m).
Dynamic Liquid Seal Replaces Mechanical Seals
Traditional pumps rely on mechanical seals that wear and need regular maintenance. The WFB pump forms a high-pressure rotating liquid film around the shaft that exceeds atmospheric pressure, preventing leakage. With no solid friction pair, it avoids dry-running and burning, suiting flammable, explosive, toxic or high-purity media.
With maintenance-free, zero-leakage, strong self-priming, corrosion resistance and smooth running, the WFB pump is an ideal replacement for sealed pumps in wastewater lifting, fine chemical acid/alkali transfer and sterile liquid transfer.